From the room

• Using the template provided mark and cut the 235 mm diameter hole in the ceiling
• Remove grill from fan and insert Fan Unit up into the hole created
• Using a Philips screwdriver, secure the fan by screwing down the 3 locking tabs
• Replace the grill
• Install the 'roof' or 'eave' vent, depending on what you decide

From within the roof space

• If you are replacing an old fan, simple plug the power lead in OR engage an electrician to hard wire it
• For a new connection, engage an electrician to set it up with a switch OR to hard wire it
• Mark up the Eave Vent within 3 metres from the fan (use the supplied template)
• Connect the flexible ducting and secure with ducting tape