Use the appropriate ONLINE FORM to quickly email us your question. Click Here
Innovative and highly effective products to make life easy or save you money.

Installation Instructions

From the room

  • Using the template provided mark and cut the 235 mm diameter hole in the ceiling
  • Remove grill from fan and insert Fan Unit up into the hole created
  • Using a Philips screwdriver, secure the fan by screwing down the 3 locking tabs
  • Replace the grill
  • Install the 'roof' or 'eave' vent, depending on what you decide

From within the roof space

  • If you are replacing an old fan, simple plug the power lead in OR engage an electrician to hard wire it
  • For a new connection, engage an electrician to set it up with a switch OR to hard wire it
  • Mark up the Eave Vent within 3 metres from the fan (use the supplied template)
  • Connect the flexible ducting and secure with ducting tape
  • footer red bcn logo Width = 208px Height = 94px
  • bcn years logo-2015
Copyright © 2021 Building Centre Network. All Rights Reserved.