• Wattage: 35 watts
• Weight: 1.65 Kg ( 3lb 10oz)
• Air Movement at Outlet of 3m duct: 55 litres per second (200 cubic feet per minute)
• Air Movement at Outlet: 104 litres per second (378 cubic feet per minute)
• Fan dimension: 200mm (8´)
• Protrusion into Roof: 200mm (8´)
• Flexible duct supplied: 150 mm diameter x 3 m ( 6´ x 10´)
• Eave Vent: 180mm x 180mm (7´ x 7´)
• Plug and power lead: 800mm ( 2´)
• Australian & New Zealand Approval No. : V06589
• Canadian & USA CSA Approval No: 237083

From the room

• Using the template provided mark and cut the 235 mm diameter hole in the ceiling
• Remove grill from fan and insert Fan Unit up into the hole created
• Using a Philips screwdriver, secure the fan by screwing down the 3 locking tabs
• Replace the grill
• Install the 'roof' or 'eave' vent, depending on what you decide

From within the roof space

• If you are replacing an old fan, simple plug the power lead in OR engage an electrician to hard wire it
• For a new connection, engage an electrician to set it up with a switch OR to hard wire it
• Mark up the Eave Vent within 3 metres from the fan (use the supplied template)
• Connect the flexible ducting and secure with ducting tape

• Easy to follow instructions
• The Fan Unit and removable grill
• An Eave Vent
• Contains two templates to be marked and cut for the Fan Unit and Eave Vent
• 3 meters of 150mm diameter flexible ducting
• PVC Ducting tape

• Expels & ducts unwanted or contaminated bathroom or kitchen air to the outside
• Has highly efficient ‘vortex’ shaped grill that maximises air flow intake
• Specially designed 7 blade’ aerofoil profiled fan maximises air extraction, minimises back draught & noise
• Powerful and quality 35 watt motor designed and made in Australia
• Supplied pre-wired with a plug attached. It can be also be hard wired by a licensed Electrician.
• Has a 150mm diameter outlet, to maximise the extraction of unwanted air from bathrooms or kitchens.

• Produces an impressive 374 cubic meters of exhaust air per hour (104 litres per second).
• Has a unique self closing ‘wings’ that stops draughts, dust or vermin entering your living spaces.
• The efficiency of this fan makes this a ‘sustainable’ and ‘energy saving’ product.
• By fully ducting the ventilation system to the outside, it complies with the Building Code of Australia.
• Made from high quality and fire retardant recyclable materials.
• Comes with 3m of flexible 150mm diameter ducting, an external ‘eave’ grill and ducting tape.
• It is a robust, quality and superior design solution. Even the eave outlet has an insect mesh protection.
• Manufactured and assembled here in Australia from quality materials.
• Easy to install, with clear instructions and ‘cut out’ templates supplied.
• Comes with a 2 year warranty.
• Available in 2 models, 240 V [ Australia, NZ and UK] and 210 V [ USA and Canada ].
• Support a genuine Australian manufacturer, Australian jobs and a 100% Australian owned family company.

Under the Building Code of Australia, for new homes it is illegal to duct air from the home into the roof space. For existing homes it is simply unhygienic and encourages insects especially cockroaches and other pests to live and multiply.

We believe this is the most superior quality and highest performing ventilation fan of it's kind on the market today.

Click here for details

During a bushfire, embers may reach your home or building 30 minutes before the actual fire may arrive. Pieces of smouldering material float through the air and if a spark or ember enters the home, it can cause ignition of combustible materials. Your house may not be in the path of the fire but may still be ignited from flying embers.

For homes or buildings in bushfire prone areas who have or propose to use corrugated or Coloubond metal roofs, it is advisable to have the optional stainless steel mesh fitted to the external perforated outlets to satisfy the building requirements in these areas of special building and compliance needs.

A stainless steel mesh (using rivets) is installed over the entry or exit openings of the units. The openings of this non-combustible mesh are less than 1.8mm in diameter, which complies with bushfire requirements. This 'mesh' has been shown to the ACT Rural Fire Service who were satisfied with it's construction and specification.

If your home is located in or near a bushfire prone area, be sure to consider this stainless steel mesh along with your 'venting' roof product.

Price for: Stainless steel mesh fitted to outlet, $12.00ea incl. GST.

You can either leave your unit in their original Zincalume form, paint them yourself or choose a colour from our extensive range of powder coating colours. Factory applied powder coating will be the most permanent finish, resisting the effects of being exposed to the external environment and more resistant to the heat and the damaging effect of infrared rays from the Sun. Due to the extreme and variable external conditions, there is no warranty on the powder coating.

There is a minimum batch cost of $66 incl. GST. if only up to 3 ventilation tiles are to be powder coated. For orders with 2 x pairs or more to be powder coated is charged at $33 per pair incl. GST.

When organising the timing of your order, please be aware that each week on a Monday or Tuesday we take the products requiring powder coating to the factory, and are usually available for us to dispatch on the Thursday or Friday of the same week.

View the 'Dulux' and 'Azko Nobel' colour chart.

Please Note:

• There is always some colour variation to the colour sample provided by Dulux and Azko Nobel.
• If you are printing this page, the colours will not be accurate using most printers and should not be used for colour matching purposes.

Using your own new or existing exhaust fan from your kitchen range hood, bathroom or Laundry, this clever concealed venting solution consists of a Zincalume Venting Out Adaptor which is fitted to a dedicated 'venting' tile made of Zincalume Bluescope steel.

Installation instructions for Concrete Roof Tiles and Adaptor:

• PDF Installation Instruction for Concrete Tile Profile #1
• PDF Installation Instruction for Concrete Tile Profile #2

Simply attach flexible ducting from the Bathroom exhaust fan or Kitchen Range Hood to a special Adaptor Kit. The Adaptor is made from Zincalume steel and is perfect for Colorbond roofs.
See also clever new bathroom extraction fan, which stops down drafts and bugs entering your home. (LINK)New Draught + Vermin blocking fan

Under the Building Code of Australia, for new homes it is illegal to duct air from the home into the roof space. For existing homes it is simply unhygienic and encourages insects especially cockroaches and other pests to live and multiply.

We believe this is the most superior quality and highest performing ventilation fan of it's kind on the market today.

Click here for details.

During a bushfire, embers may reach your home or building 30 minutes before the actual fire may arrive. Pieces of smouldering material float through the air and if a spark or ember enters the home, it can cause ignition of combustible materials. Your house may not be in the path of the fire but may still be ignited from flying embers.

For homes or buildings in bushfire prone areas who have or propose to use corrugated or Coloubond metal roofs, it is advisable to have the optional stainless steel mesh fitted to the external perforated outlets to satisfy the building requirements in these areas of special building and compliance needs.

A stainless steel mesh (using rivets) is installed over the entry or exit openings of the units. The openings of this non-combustible mesh are less than 1.8mm in diameter, which complies with bushfire requirements. This 'mesh' has been shown to the ACT Rural Fire Service who were satisfied with it's construction and specification.

If your home is located in or near a bushfire prone area, be sure to consider this stainless steel mesh along with your 'venting' roof product.

Price for: Stainless steel mesh fitted to outlet, $12.00ea incl. GST.